вот так должно быть
<6>[ 162.545170] dvb-usb: found a 'USB DVB-T Device' in warm state.
<6>[ 162.545253] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
<6>[ 162.547219] DVB: registering new adapter (USB DVB-T Device)
<7>[ 162.564552] RTL2832U usb_init_bulk_setting : USB2.0 HIGH SPEED (480Mb/s)
<7>[ 162.848789] RTL2832U check_tuner_type : E4000 tuner on board...
<4>[ 163.486848] DVB: registering adapter 0 frontend 0 (Realtek DVB-T RTL2832)...
<6>[ 163.499369] input: IR-receiver inside an USB DVB receiver as /devices/platform/tegra-ehci.0/usb1/1-1/1-1.4/input/input5
<6>[ 163.500507] keychord: using input dev IR-receiver inside an USB DVB receiver for fevent
<6>[ 163.588052] dvb-usb: schedule remote query interval to 287 msecs.
<6>[ 163.588181] dvb-usb: USB DVB-T Device successfully initialized and connected.
<6>[ 163.588669] usbcore: registered new interface driver dvb_usb_rtl2832u
а у меня вот
<6>[ 496.131590] dvb-usb: found a 'RTL2832U DVB-T USB DEVICE' in warm state.
<6>[ 496.131680] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
<6>[ 496.136617] DVB: registering new adapter (RTL2832U DVB-T USB DEVICE)
<7>[ 496.156361] RTL2832U usb_init_bulk_setting : USB2.0 HIGH SPEED (480Mb/s)
<7>[ 496.432052] RTL2832U check_tuner_type : ERROR Unknown tuner on board...
<3>[ 496.432351] dvb-usb: no frontend was attached by 'RTL2832U DVB-T USB DEVICE'
<6>[ 496.433702] input: IR-receiver inside an USB DVB receiver as /devices/platform/tegra-ehci.0/usb2/2-1/input/input3
<6>[ 496.435221] keychord: using input dev IR-receiver inside an USB DVB receiver for fevent
<6>[ 496.450323] dvb-usb: schedule remote query interval to 287 msecs.
<6>[ 496.450557] dvb-usb: RTL2832U DVB-T USB DEVICE successfully initialized and connected.
<6>[ 496.458239] usbcore: registered new interface driver dvb_usb_rtl2832u
|