Цитата:
Сообщение от omidnami
 autolauncher 1024*760 cannot communicate with pl2303
My pl2303 in rooted android 4.4.2 recognized (terminal >>lsusb command) /dev/bus/usb/001/001
autolauncher setting changed to /dev/bus/usb/001/001
baudrate :9600 (also tried 38400)
tested pl2303 with another android app (serial terminal) and it's ok;
is that capacitor need to add to pl2303??? |
Seems u dooing some wrong
In autolauncher u should set device node? something like /dev/ttyUSB0
Also u can check all without autolauncher, with terminal emulator. just send there symbols, that defined in sketch and u should have ack from arduino (if u dont removed debug)