Показать сообщение отдельно
Старый 30.06.2015, 22:52   #305
armlive
Старший Пользователь
 
Регистрация: 12.12.2013
Возраст: 43
Город: Армавир
Регион: 23, 93
Машина: Nissan Qashqai
Сообщений: 510
armlive is a glorious beacon of lightarmlive is a glorious beacon of lightarmlive is a glorious beacon of lightarmlive is a glorious beacon of lightarmlive is a glorious beacon of light
По умолчанию

Цитата:
Сообщение от Daniel Посмотреть сообщение
Сразу пойдет. Если карта 44100kHz 16bit. Для другой частоты нужно корректировать audio_policy.conf
Не нужно, заводится без проблем))) А еще в разделе разработчика появился пункт, отключающий вывод на usb звука. Правда встроенный микрофон, в отличии от 4.4.4, работать перестал
Цитата:
Android 5.0 (API level 21) and above supports a subset of USB audio class 1 (UAC1) features:

The Android device must act as host
The audio format must be PCM (interface type I)
The bit depth must be 16-bits, 24-bits, or 32-bits where 24 bits of useful audio data are left-justified within the most significant bits of the 32-bit word
The sample rate must be either 48, 44.1, 32, 24, 22.05, 16, 12, 11.025, or 8 kHz
The channel count must be 1 (mono) or 2 (stereo)

Android 4.1 (API level 16)
The audio format must be 16-bit PCM
The sample rate must be 44.1 kHz
The channel count must be 2 (stereo)

enable all kernel features needed: USB host mode, USB audio, isochronous transfer mode; see Android Kernel Configuration
Мало того, с Android 5, стала нативная поддержка асинхронного режима USB Audio Class 2.0 (UAC2). Разработчикам рекомендуют при разработке это учитовать
__________________
Nexus 7 (2013) Nissan Qashqai
armlive вне форума   Ответить с цитированием